Tuner Unit Removal and Installation
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
NOTE: If you are replacing the tuner unit, write down the AM/FM radio presets (if possible), and enter them into the new audio-navigation unit or the new audio unit.
1.
Rear Side Trim Panel (Right Side) - Remove (2-door)
2.
Rear Seat Side Trim (Right Side) - Remove (Except 2-door)
3.
Tuner Unit - Remove
1.
Disconnect the connectors (A).
2.
Loosen the nut (B).
3.
Remove the nut (C).
4.
Remove the tuner unit (D).
4.
All Removed Parts - Install
1.
Install the tuner unit in the reverse order of removal.
