Clean and dry the transmission end crankshaft oil seal housing.
2.
Apply a light coat of new engine oil to the crankshaft and to the lip of the new transmission end crankshaft oil seal.
3.
Use the driver handle, 15 x 135L and the oil seal driver attachment, 92 mm to drive a new transmission end crankshaft oil seal (A) squarely into the oil seal case to the specified installed height.
4.
Clean the excess oil off the crankshaft, and check that the oil seal lip is not distorted.
5.
Measure the distance between the oil seal case (A) and the transmission end crankshaft oil seal (B).
