Brake Pedal Pad Cover Removal and Installation
Wear goggles or safety glasses to prevent eye injury.
NOTE: Unless otherwise indicated, illustrations used in the procedure are for MT.
1.
Brake Pedal Pad Cover - Remove
1.
Cover the carpet under the brake pedal to prevent metal shavings from getting on the carpet.
2.
Center-punch each rivet (A).
3.
Drill the rivet heads off with a 3 mm (0.12 in) drill bit (B).
NOTE: Do not drill the pedal pad (C).
4.
Remove the pedal pad cover (A).
5.
Remove the pedal cover (B).
NOTE: Unless otherwise indicated, illustrations used in the procedure are for MT.
1.
Brake Pedal Pad Cover - Install
1.
Set the pedal cover on the pedal pad cover.
2.
Firmly install the pedal pad cover (A) with the rivets (B).
3.
Make sure the pedal cover and pad cover are securely fastened on the brake pedal.
