Wiper/Washer Switch Removal, Installation, and Test
SRS components are located in this area. Review the
SRS component locations
and the
precautions and procedures
before doing repairs or service.
1.
Column Covers - Remove
2.
Wiper/Washer Switch - Remove
1.
Disconnect the connector (A).
2.
Remove the wiper/washer switch (B) by pressing the tabs.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
1.
Wiper/Washer Switch - Test
Windshield
Rear window (with rear window wiper)
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the wiper/washer switch (A).
