Air Cleaner Removal and Installation

NOTE: enu_12713377_2.0 Where icon is shown, click for further information.


1
Air Cleaner

8313_3.0_enu_15085898_4.0

enu_12714505_1.0
Torque: N·m (kgf·m, lbf·ft)


2
Air Cleaner

8313_3.0_enu_15085899_4.0


3
Air Flow Tube

8313_3.0_enu_15085900_4.0

enu_12713377_2.0
Detailed information, notes, and precautions
enu_12714524_1.0
Replace

Air Cleaner

1. Air Cleaner - Remove


2. Air Intake Seal - Remove


3. Air Intake Tube - Remove


4. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Air Flow Tube

1. Air Cleaner - Remove


3. Air Flow Tube B - Remove


4. Air Flow Joint - Remove


5. Air Flow Tube A - Remove
Note for installation

When installing the break head band, do the following procedures.
1.
Tighten the break head bolt until the bolt head (A) is twisted off completely.
NOTE: Do not use an air tool.
2.
Make sure the stopper end (B) contacts to the housing end (C) after tightening the break head bolt.

6. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.