Engine Oil Pump Chain Removal and Installation
Special Tools Required
Image Description/Tool Number
310190.png Universal Lifting Eyelet 07AAK-SNAA120
2279882.png Engine Support Hanger, A and Reds AAR-T1256*
*: Available through the Honda Tool and Equipment Program 888-424-6857.

1

8363_3.0_enu_15102554_2.0

2. Engine Support Hanger and Universal Lifting Eyelet - Install
NOTE:
Be careful when working around the windshield.
Be careful not to damage the hood opener cable when installing the engine support hanger at the front bulkhead.
1.
Remove the front damper caps.
2.
Install the universal lifting eyelet with a commercially available spacer (A) (about 50 mm (1.97 in) in length) to the cylinder head.
3.
Install the engine support hanger onto the vehicle as shown.
4.
Attach the hook to the slotted hole in the universal lifting eyelet.
5.
Tighten the wing nut (B) by hand, and lift and support the engine/transmission.

4. Oil Pump Chain - Remove


5. Crankshaft Sprocket - Remove (If necessary)



NOTE: enu_12713377_2.0 Where icon is shown, click for further information.


1

8363_3.0_enu_15102556_2.0

enu_12713377_2.0
Detailed information, notes, and precautions

1. Crankshaft Sprocket - Install


2. Oil Pump Chain - Install
1.
Set the crankshaft to top dead center (TDC). Align the TDC mark (A) on the crankshaft sprocket with the pointer (B) on the engine block.
2.
Install the oil pump chain.
NOTE: These marks (C) shall be used in product process only and not used for maintenance purpose. There is no need to line up the marks as it has no effect on the engine operation.

4. Engine - Support
1.
Lift and support the engine with a jack and a wood block under the oil pan.

5. Engine Support Hanger and Universal Lifting Eyelet - Remove