Turn the crankshaft to align No. 1 position at top dead center (TDC); the white mark (A) on the crankshaft pulley lines up with the pointer (B) on the cam chain case.
2.
With the No. 1 piston at top dead center (TDC), check the "UP" mark (A) on VTC actuator B should be at the top.
3.
Check the TDC marks (B) on VTC actuator A and VTC actuator B, the marks should align. The TDC marks (C) on VTC actuator B should line up with the top edge of the cam chain case (D). If the marks are not aligned, remove the cam chain and reinstall the cam chain properly.
5.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
