Adaptive Damper Control Unit Removal and Installation
NOTE:
How to read the torque specifications
.
1.
Rear Side Trim Panel - Remove (Left Side) (2-Door)
2.
Rear Seat Side Trim - Remove (Left Side) (4/5-Door)
3.
Adaptive Damper Control Unit - Remove
1.
Disconnect the connector (A).
2.
Remove the clip (B).
3.
Remove the adaptive damper control unit (C).
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
5.
Adaptive Damper Control Unit Software - Check
1.
Make sure the adaptive damper control unit has the latest software. If it does not have the latest,
update the software in the adaptive damper control unit
.
