With rear seat heater: Disconnect the connector (A).
2.
With rear seat heater: From the back of the seat cushion, pass the seat heater harness (B) out through the seat cushion cover.
3.
From the back of the rear seat cushion (A), release the upholstery rings (B), then fold back the rear seat cushion cover.
Except Type-R
Type-R
4.
Pull back the edge of the seat cushion cover (A) all the way around, and release the upholstery rings (B).
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).
