Hood Air Intake Trim Removal and Installation
1. Hood Air Intake Trim - Remove
1.
Remove the nuts (A).
2.
Remove the hood air intake trim (A).

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE : If you are reusing the original hood air intake trim, apply the adhesive primer to the area where the new double-sided adhesive tape will be applied, then attach the new double-sided adhesive tape to the trim as shown.
Adhesive tape requirements
(A)
Thickness
0.4 mm (0.016 in)
Width
4 mm (0.16 in)
Length
1,400 mm (55.12 in)
(B)
Thickness
0.4 mm (0.016 in)
Width
10 mm (0.39 in)
Length
30 mm (1.18 in)