Exterior Seal Removal and Installation
Front Bumper Seal

1. Front Bumper Seal - Remove


Side Sill Panel Seal

1. Side Sill Panel Seal - Remove


Rear Bumper Seal

1. Rear Bumper Seal - Remove


Front Bumper Seal

1. Front Bumper Seal - Install
1.
From under the front bumper (A), place a mark on the middle of the front bumper.
2.
Clean the front bumper bonding surface with a sponge dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
3.
Install the front bumper seal (A) to the front bumper (B) from the mark placed in step 1 as shown.
NOTE:
Do not use an adhesive primer.
Do not run off the edges (C). If necessary, cut the excess front bumper seal.
After attaching the front bumper seal, press the front bumper seal firmly.

Side Sill Panel Seal

1. Side Sill Panel Seal - Install
1.
Clean the side sill panel bonding surface with a sponge dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
2.
Install the side sill panel seal (A) to the side sill panel (B) from the edge as shown.
NOTE:
Do not use an adhesive primer.
Do not run off the edge (C). If necessary, cut the excess side sill panel seal.
After attaching the front bumper seal, press the front bumper seal firmly.

Rear Bumper Seal

1. Rear Bumper Seal - Install
1.
From under the rear bumper (A), place a mark on the middle of the rear bumper.
2.
Clean the rear bumper bonding surface with a sponge dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
3.
Install the rear bumper seal (A) to the rear bumper (B) from the mark placed in step 1 as shown.
NOTE:
Do not use an adhesive primer.
Do not run off the edges (C). If necessary, cut the excess rear bumper seal.
After attaching the front bumper seal, press the front bumper seal firmly.