Rear License Trim Removal and Installation
NOTE:
How to read the torque specifications
.
2-door
1.
Trunk Lid Trim Panel - Remove
2.
Rear License Trim - Remove
1.
Remove the bolts (A).
2.
Carefully pull out the rear license trim (A) to release the pins (B) of the clips (C), and remove the clips (D).
3.
Disconnect the connectors (E), then remove the rear license trim.
4.
Remove the grommets (A) from the trunk lid, then install the grommets to the pins on the rear license trim.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
4-door
1.
Trunk Lid Trim Panel - Remove
2.
Rear License Trim - Remove
1.
Remove the bolt (A).
2.
Carefully pull out the rear license trim (A) to release the pins (B) of the clips (C), and remove the clips (D).
3.
Disconnect the connectors (E), then remove the rear license trim.
4.
Remove the grommets (A) from the trunk lid, then install the grommets to the pins on the rear license trim.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
5-door
1.
Tailgate Lower Trim Panel - Remove
2.
Rear License Trim - Remove
1.
Remove the bolts (A) and the nuts (B).
Rear License Trim Type 1
Rear License Trim Type 2
2.
Remove the rear license trim (A).
3.
Disconnect the connectors (B).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
