VSA Off Switch Removal, Installation, and Test
1.
Driver's Dashboard Lower Cover - Remove
2.
VSA Off Switch - Remove
NOTE: The position of the switch may be different, depending on the model.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
1.
VSA Off Switch - Test
VSA OFF switch 4P connector type
VSA OFF switch 5P connector type
VSA OFF switch 8P connector type
1.
On the switch side, check for continuity between the connector terminal in each switch position according to the table.
2.
If the switch does not works as described in the table, replace the VSA OFF switch.
