Keyless Access System Symptom Troubleshooting - All the doors will not lock and unlock
All the doors will not lock and unlock
1.
Door lock actuator operation check 1:

Door lock actuator operation check 1
?1.
Remove all the keyless remotes from inside the vehicle, and close all doors.

?2.
Push each LOCK and UNLOCK buttons of the keyless remote, at least 10 times.

Do the door lock actuators work normally?

     
YES
     
     
     
Go to step 2.
     
NO
     
     
     
Go to step 3.
2.
Door lock actuator operation check 2:

Door lock actuator operation check 2
?1.
Lock and unlock the doors with touching the door outer handle.

Do the door lock actuators work normally?

     
YES
     
     
     
Intermittent failure, the system is OK at this time. Check for loose or poor connections.?
     
NO
     
     
     
3.
Determine possible failure area (keyless remote, others):

Determine possible failure area (keyless remote, others)
?1.
Push the LOCK and the UNLOCK buttons of the keyless remote, and check if the LED on the keyless remote comes on.

Does the LED come on?

     
YES
     
     
     
Go to step 4.
     
NO
     
     
     
Replace the keyless remote battery and recheck the system. If the symptom does not go away, replace the keyless remote.?
4.
Door lock actuator operation check 2:

Door lock actuator operation check 2
?1.
Lock and unlock the doors with touching the door outer handle.

Do the door lock actuators work normally?

     
YES
     
     
     
Register the keyless remote, and recheck. If the symptom does not go away, replace the keyless remote.?
     
NO
     
     
     
Go to step 5.
5.
Door lock actuator operation check 3:

Door lock actuator operation check 3
?1.
Lock and unlock the doors with the driver's door lock switch.

Do the door lock actuators work normally?

     
YES
     
     
     
Go to step 6.
     
NO
     
     
     
Check the B-CAN system DTCs. If not, check the door lock system.?
6.
Keyless access system check:

Keyless access system check
?1.
Do the keyless access remote check using the all keyless remotes.

Are the all keyless remotes OK?

     
YES
     
     
     
Do the SYSTEM CHECK 1 and SYSTEM CHECK 2 with the HDS. If the result is indicated, troubleshoot the items based on the SYSTEM CHECK table.?
     
NO