B1130 Front Passenger's Power Window Motor A Pulse Malfunction
1.
Problem verification:
Problem verification
?1.
Clear the DTCs with the HDS.
?2.
Turn the vehicle to the OFF (LOCK) mode and then the ON mode.
?3.
Open and close the front passenger's power window by using the front passenger's power window switch manually.
?4.
Check for DTCs with the HDS.
DTC Description
DTC
B1130 Front Passenger's Power Window Motor A Pulse Malfunction
Is DTC B1130 indicated?
YES
Go to step 2.
NO
Intermittent failure, the system is OK at this time.?
2.
Open wire check (P/W AS MTR PLSA line):
Open wire check (P/W AS MTR PLSA line)
?1.
Turn the vehicle to the OFF (LOCK) mode.
?2.
Disconnect the following connectors.
Front passenger's power window switch 37P connector Front passenger's power window motor 6P connector
?3.
Check for continuity between test points 1 and 2.
Test condition
Vehicle OFF (LOCK) mode Front passenger's power window switch 37P connector: disconnected Front passenger's power window motor 6P connector: disconnected
Front passenger's power window motor 6P connector No. 5
Is there continuity?
YES
The P/W AS MTR PLSA wire is not open. Go to step 3.
NO
Repair an open or high resistance in the wire.?
3.
Shorted wire check (P/W AS MTR PLSA line):
Shorted wire check (P/W AS MTR PLSA line)
?1.
Check for continuity between test points 1 and 2.
Test condition
Vehicle OFF (LOCK) mode Front passenger's power window switch 37P connector: disconnected Front passenger's power window motor 6P connector: disconnected