SRS Symptom Troubleshooting - Front seat belt reminder indicator does not come on, turn off, or flash (KA/KC models)

SRS Symptom Troubleshooting - Front seat belt reminder indicator does not come on, turn off, or flash

Front seat belt reminder indicator does not come on, turn off, or flash

NOTE:

	Before doing this troubleshooting procedure, find out if the vehicle was in a collision. If so, verify that all the required components were replaced with new components of the correct part number and were properly installed.
	Before doing this troubleshooting procedure, review SRS Precautions and Procedures and General Troubleshooting Information.

DTC check:

DTC check

?1.

Check for DTCs with the HDS.

DTC Description	DTC

Are any SRS DTCs indicated?

Go to SRS DTC troubleshooting.?

Go to step 2.

Body electrical system DTC check:

Body electrical system DTC check

?1.

Check for body electrical DTCs with the HDS.

DTC Description	DTC
U0151 Gauge control module lost communication with SRS unit

Is DTC U0151 indicated?

Go to step 3.

Gauge control module check:

Gauge control module check

?1.	Do the gauge control module self-diagnostic function.

Does the front seat belt reminder indicator blink?

Check for any authorized service information related to the DTCs or symptoms you are troubleshooting or replace the SRS unit.?