Audio System DTC Troubleshooting: 1302

DTC 1302: GPS Receiver Error 1

NOTE:

	Check the vehicle 12 volt battery condition first.
	This audio DTC sets when there is an internal GPS receiver problem (freeze error).
	Before you troubleshoot, make sure to follow the General Troubleshooting Information.

Problem verification:

Problem verification

?1.	Clear the hard error codes.

?2.	Turn the vehicle to the OFF (LOCK) mode.

?3.	Wait for at least 6 seconds.

?4.	Turn the vehicle to the ON mode, and wait at least 1 minute.

?5.	Check for hard error codes.

Is DTC 1302 indicated?

Intermittent failure, the system is OK at this time.?