DTC Troubleshooting: P2228
DTC P2228: BARO Sensor Circuit Low Voltage
NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description
Confirmed DTC
Pending DTC
P2228 BARO Sensor Circuit Low Voltage
   

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Check the parameter(s) below with the HDS.
Signal
Threshold
Current conditions
Values
Unit
Values
Unit
Baro Sensor
Less than 336
mmHg
   

Do the current condition(s) match the threshold?

     
YES
     
     
     
The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM, then recheck. If DTC P2228 goes away and the PCM was substituted, replace the original PCM.?
     
NO