B0050-F0 Driver's Seat Belt Buckle Switch Malfunction
1.
SRS DTCs check:
SRS DTCs check
?1.
Turn the vehicle to the ON mode.
?2.
Check for SRS DTCs with the HDS.
DTC Description
DTC
Are any DTCs indicated?
YES
Go to indicated DTCs troubleshooting.?
NO
Go to step 2.
2.
Problem verification:
Problem verification
?1.
Clear the DTC with the HDS.
?2.
Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.
?3.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
B0050-F0 Driver's Seat Belt Buckle Switch Malfunction
Is DTC B0050-F0 indicated?
YES
Check for loose terminals and poor connections in the VSA modulator-control unit 46P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the VSA modulator-control unit.?
NO
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.?