DTC Troubleshooting: C1130-62
DTC C1130-62: Clutch Pedal Stroke Sensor CPS1/CPS2 Incorrect Voltage Correlation
NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description
DTC
Freeze Frame
C1130-62 Clutch Pedal Stroke Sensor CPS1/CPS2 Incorrect Voltage Correlation
    

1.
DTC check:

DTC check
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

?4.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
C1130-62 Clutch Pedal Stroke Sensor CPS1/CPS2 Incorrect Voltage Correlation
    
C1131-14 Clutch Pedal Stroke Sensor CPS1/CPS2 Open or Short
    

Is DTC C1130-62 indicated?

     
YES
     
     
     
If DTC C1130-62 is only indicated, go to step 2.
     
YES
     
     
     
If DTC C1131-14 is also indicated, go to DTC C1131-14.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.?
2.
Clutch pedal stroke sensor check (substitution):

Clutch pedal stroke sensor check (substitution)
?1.
Turn the vehicle to the OFF (LOCK) mode.

?2.
Substitute a known-good clutch pedal assembly.

?3.
Turn the vehicle to the ON mode.

?4.
Clear the DTC with the HDS.


?5.
Turn the vehicle to the OFF (LOCK) mode, then to the ON mode.

?6.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
C1130-62 Clutch Pedal Stroke Sensor CPS1/CPS2 Incorrect Voltage Correlation
    

Is DTC C1130-62 indicated?

     
YES
     
     
     
Check for loose terminals and poor connections in the VSA modulator-control unit 46P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the VSA modulator-control unit.?
     
NO