DTC Troubleshooting: C1014-1C, C1015-1C
DTC C1014-1C: Left Front Brake Caliper Pressure Sensor Failure (Internal Circuit Failure)
DTC C1015-1C: Right Front Brake Caliper Pressure Sensor Failure (Internal Circuit Failure)
NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description
DTC
Freeze Frame
C1014-1C Left Front Brake Caliper Pressure Sensor Failure (Internal Circuit Failure)
    
C1015-1C Right Front Brake Caliper Pressure Sensor Failure (Internal Circuit Failure)
    

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Turn the vehicle to the OFF (LOCK) mode, then start the engine.

?4.
Press the brake pedal several times.

?5.
Check for DTCs with the HDS.
DTC Description
DTC
Freeze Frame
C1014-1C Left Front Brake Caliper Pressure Sensor Failure (Internal Circuit Failure)
    
C1015-1C Right Front Brake Caliper Pressure Sensor Failure (Internal Circuit Failure)
    

Is DTC C1014-1C or C1015-1C indicated?

     
YES
     
     
     
Check for loose terminals and poor connections in the VSA modulator-control unit 46P connector. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting. If they are OK, replace the VSA modulator-control unit.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the Freeze data/on-board snapshot.?