DTC Troubleshooting: P061B
DTC P061B: PCM Internal Malfunction (Torque Calculation)
NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description
Confirmed DTC
Pending DTC
P061B PCM Internal Malfunction (Torque Calculation)
    

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Turn the vehicle to the OFF (LOCK) mode.

?4.
Start the engine, then let it idle.

?5.
Test-drive the vehicle for several minutes in the range of these recorded on-board snapshot parameter.
Engine speed
APP Sensor

?6.
Check for Pending or Confirmed DTCs with the HDS.
DTC Description
Confirmed DTC
Pending DTC
P061B PCM Internal Malfunction (Torque Calculation)
    

Is DTC P061B indicated?

     
YES
     
     
     
The failure is duplicated. Check for any authorized service information related to the DTCs or symptoms you are troubleshooting, or substitute a known-good PCM, then recheck. If DTC P061B goes away and the PCM was substituted, replace the original PCM.?
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the throttle body and the PCM. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot.?