DTC Troubleshooting: P0130
DTC P0130: A/F Sensor (Sensor 1) Out of Range
NOTE: Before you troubleshoot, review the general troubleshooting information.

DTC Description
Confirmed DTC
Pending DTC
P0130 A/F Sensor (Sensor 1) Out of Range
    

1.
Problem verification:

Problem verification
?1.
Turn the vehicle to the ON mode.

?2.
Clear the DTC with the HDS.


?3.
Start the engine.

?4.
Hold the engine speed at 3,000 rpm without load (CVT in P or N, M/T in neutral) until the radiator fan comes on, then let it idle.

?5.
Monitor the OBD STATUS for P0130 in the DTCs MENU with the HDS.
DTC Description
OBD STATUS
P0130 A/F Sensor (Sensor 1) Out of Range
  

Does the HDS indicate FAILED?

     
YES
     
     
     
The failure is duplicated. Replace the A/F sensor (Sensor 1).?
     
NO
     
     
     
If the HDS indicates PASSED, intermittent failure, the system is OK at this time. Check for poor connections or loose terminals at the A/F Sensor (Sensor 1) and the PCM. If the on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the on-board snapshot. If the HDS indicates EXECUTING, keep driving until a result comes on. If the HDS indicates OUT OF CONDITION, go to step 1-4 and recheck.?