DTC Troubleshooting: B2614
DTC B2614: Rear 1st Sensor Failure
NOTE:
If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.
The connection order of the sensor is 1st ? 2nd ? 3rd ? 4th from the side near the control unit.

DTC Description
DTC
B2614 Rear 1st Sensor Failure
  

1.
Problem verification:

Problem verification
?1.
Clear the DTCs with the HDS.


?2.
Turn the vehicle to the OFF (LOCK) mode and then the ON mode.

?3.
Wait for at least 6 seconds.

?4.
Check for DTCs with the HDS.
DTC Description
DTC
B2614 Rear 1st Sensor Failure
  

Is DTC B2614 indicated?

     
YES
     
     
     
     
NO
     
     
     
Intermittent failure, the system is OK at this time. Check for loose or poor connections.?