Climate Control System Description - A/C Pressure Sensor

The A/C pressure sensor is attached to a receiver pipe of the A/C condenser exit side. This sensor uses the sensor that the output voltage changes by the pressure. PCM receives the voltage signal and is used to drive the A/C compressor. PCM also controls the radiator fan and A/C condenser fan. When the A/C system pressure rises than an upper limit, or decreases than a lower limit, PCM stops the A/C compressor to protect the system.

	Upper limit: 2,850 kPa (29.06 kgf/cm², 413.4 psi)
	Lower limit: 196 kPa (2.00 kgf/cm², 28.4 psi)
	High speed fans switch point: 1,450 kPa (14.79 kgf/cm², 210.3 psi)

NOTE: This illustration is an example only. Appearance and structure of the actual parts may vary depending on the model.