VSA System Description - VSA OFF MODE
When the VSA OFF switch is pressed, the VSA OFF indicator will illuminate and the VSA will go onto OFF mode.
During VSA OFF mode:
|
If the TCS activates, the VSA indicator blinks while the VSA OFF indicator is still on. |
|
The ability to gain traction on loose sand and deep snow is increased by terminating the TCS function at low speeds. |
|
During a standing start from varying road surfaces under the left and right side of the vehicle, the TCS function helps gain traction. |
|
When the vehicle is on a lift while being serviced and its tires are not in contact with any surface, the wheel speed will not exceed 31 mph (50 km/h). |
|
The TCS function is fully disabled when the VSA maintenance mode is activated. |
VSA Maintenance Mode
Entering the VSA maintenance mode is necessary whenever the vehicle is on a lift or two-wheel dynamometer, and wheel spin can reach speeds above 31 mph (50km/h). Refer to shop manual remove and installation concern to enter VSA maintenance mode. |