Keyless/Power Door Locks/Security System Description - Overview
Keyless Entry System
The keyless entry system is integrated with the multiplex integrated control system. The multiplex integrated control unit (MICU) receives LOCK, UNLOCK, and PANIC signals from the immobilizer-keyless control unit*1 or the keyless access control unit*2.

The keyless entry system allows you to lock and unlock the vehicle with the keyless transmitter*1 or the remote*2. When you press the LOCK button, all doors lock. When you press the UNLOCK button once, only the driver's door unlocks. The other doors will unlock when you press the button a second time. The doors will not lock with the keyless transmitter*1 or the remote*2 if a door is not fully closed, or if the vehicle is in the ON mode.

When the interior light switch is in the DOOR position, it comes on when the UNLOCK button is pressed.
If a door is not opened, the light goes off and the doors will relock in about 30 seconds. If the doors are locked with the keyless transmitter*1 or the remote*2 within 30 seconds, the light goes off immediately.

NOTE: The keyless entry system can be customized to suit the customer's needs. For more information about keyless/security system options, refer to the Owner's Manual.

*1: Without keyless access system
*2: With keyless access system
Door Lock System
The system has three circuits between door lock actuators and the MICU to improve safety of the system. One is for the driver's side door lock actuator, the driver's side rear door lock actuator and tailgate lock actuator*, and passenger's side door lock actuators.
Door lock actuator circuit has two fuses. When one fuse is blown, another fuse in the same circuit must be checked.

*: Without keyless access system
Security Alarm System
The security alarm system automatically arms after the doors, the hood, and the tailgate are closed and locked. For the system to arm, the vehicle mode must be the OFF (LOCK) mode and the MICU must receive inputs that the doors, the hood, and the tailgate are closed and locked. The alarm can be disarmed at any time by unlocking the driver's door with the key or pressing the UNLOCK button on the keyless transmitter*1 or the remote*2.

The security indicator in the gauge control module begins to flash immediately after the vehicle is completely closed and locked, and 15 seconds later, the security system arms. Once armed, the security indicator flashes more slowly. If the security indicator does not flash after the doors are locked, the system is not arming.

Once the system is armed, it will sound an alarm when any of these occur:
The hood is opened.
A door is unlocked without using the mechanical key or the keyless transmitter*1 or the remote*2.
A door or the tailgate is forced open.
The keyless transmitter*1 or the remote*2 PANIC button is pressed.
Shift lever is shifted to other than P position. (CVT)

When the system sounds the alarm, the horn sounds and the exterior lights flash for 2 minutes. The alarm can be stopped at any time by unlocking the driver's door by pressing the UNLOCK button on the keyless transmitter*1 or the remote*2.

*1: Without keyless access system
*2: With keyless access system
Panic Mode
The panic mode sounds the alarm in order to attract attention. When the PANIC button on the keyless transmitter*1 or the remote*2 is pressed and held for 2 seconds, the horns sound and the exterior lights flash for about 30 seconds.

The panic mode can be canceled at anytime by pressing any button on the keyless transmitter*1 or the remote*2 or by turning the vehicle to the ON mode. The panic mode will not function if the vehicle is in the ON mode.

*1: Without keyless access system
*2: With keyless access system

Without Keyless Access System

With Keyless Access System