Moonroof Motor-Control Unit Connector for Inputs and Outputs

Terminal number
Terminal name
Description
Signal
1
+B SUNROOF
Power source for moonroof control unit/motor
About battery voltage at all times
2
Not used
???
???
3
Not used
???
???
4
GND
Ground for moonroof control unit/motor
Less than 0.2 V at all times
5
VSP
Detects VSP signal
Depending on vehicle speed: pulse
6
Not used
???
???
7
S/R SW OPEN
Detects S/R SW OPEN signal
With moonroof switch OPEN: less than 0.2 V
If none of above conditions are met: about battery voltage
8
S/R SW TILT
Detects S/R SW TILT signal
With moonroof switch TILT: less than 0.2 V
If none of above conditions are met: about battery voltage
9
S/R SW CLOSE
Detects S/R SW CLOSE signal
With moonroof switch CLOSE: less than 0.2 V
If none of above conditions are met: about battery voltage
10
IG1 OPTION
IG1 power source
With vehicle in ON mode: about battery voltage
11
P/W TIMER
Outputs P/W TIMER signal
Without vehicle off operation: about battery voltage
With vehicle off operation: less than 0.2 V
12
Not used
???
???
13
Not used
???
???
14
S/R SW AUTO
Detects S/R SW AUTO signal
With moonroof switch AUTO: less than 0.2 V
If none of above conditions are met: about battery voltage