Remove the transmission fluid pan (A) with the dowel pins (B) and the gasket (C).
NOTE: The actual transmission fluid (HCF-2) capacity will vary from the specified capacity based on the length of time the transmission fluid pan is off the transmission. Avoid leaving the transmission fluid pan off for extend periods of time.
2.
Remove the transmission magnets (A).
NOTE: Keep all foreign particles out of the transmission.
1.
Transmission Fluid Pan - Install
1.
Install new transmission magnets (A).
2.
Install the transmission fluid pan (A) with the dowel pins (B) and a new gasket (C).
NOTE:
Be careful not to damage the solenoid wire harness while installing the transmission fluid pan.
Tighten the transmission fluid pan mounting bolts in a crisscross pattern in at least two steps.
