Torque Converter Turbine Speed Sensor Removal and Installation

NOTE: Keep all foreign particles out of the transmission.

3. Torque Converter Turbine Speed Sensor - Remove


1.
Disconnect the connector (A).

NOTE: Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.

2.
Remove the torque converter turbine speed sensor (B) with the O-ring (C).

4. All Removed Parts - Install

1.
Install the parts in the reverse order of removal.

NOTE:
When installing the torque converter turbine speed sensor, be sure to use a new O-ring which should be applied a light coat of clean transmission fluid before installation.