CVT Speed Sensor Removal and Installation (CVT)

CVT Speed Sensor Removal and Installation

NOTE: Keep all foreign particles out of the transmission.

1.	Front Grille Cover - Remove

2.	Air Cleaner - Remove

3.	CVT Speed Sensor - Remove

Disconnect the connector (A).

NOTE: Check the connector for corrosion, dirt, or oil, and clean or repair if necessary.

Remove the CVT speed sensor (B) with the sensor washer (C) and the O-ring (D).

4.	All Removed Parts - Install

Install the parts in the reverse order of removal.

NOTE: When installing the CVT speed sensor, be sure to use a new O-ring which should be applied a light coat of clean transmission fluid before installation.