CVT Differential Carrier Disassembly and Reassembly
Special Tools Required
Image Description/Tool Number
310224.png Installer Attachment 40 mm 07LAD-PW50601
1. Differential - Exploded View

Exploded View



NOTE: The carrier bearing and the carrier bearing outer race should be replaced as a set.

1. Differential Carrier Bearing - Remove

Transmission housing side

Torque converter housing side
1.
Remove the carrier bearings (A) using a commercially available bearing puller (B) and a spacer (C).

2. Final Driven Gear - Remove
NOTE: The final driven gear bolts have left-hand threads.



NOTE:
The carrier bearing and the carrier bearing outer race should be replaced as a set.
Adjust the carrier bearing preload after replacing the carrier bearing and the carrier bearing outer race.
Apply a light coat of clean transmission fluid on all parts before installation.

1. Final Driven Gear - Install
NOTE:
The final driven gear bolts have left-hand threads.
Tighten the bolts to the specified torque in a crisscross pattern in at least two steps.

2. Differential Carrier Bearing - Install

Transmission housing side

Torque converter housing side
1.
Install the carrier bearing (A) until it bottoms using the 40 mm installer attachment and a press.