Front Door Glass and Regulator Removal and Installation
2. Front Door Plastic Cover - Remove


1.
Disconnect the connector (A).

2.
Remove the harness clip (B).

3.
Remove the plug caps (C).

4.
Remove the front door plastic cover (D).

NOTE: If the plastic cover is damaged or torn, replace it with a new one.

3. Front Door Glass - Remove


1.
Lower the front door glass (A) until you can see the bolts (B), then remove them.

2.
Carefully pull out the front door glass through the window slot.

NOTE: Take care not to drop the front door glass inside the door.

4. Front Door Regulator - Remove


1.
Disconnect the connector (A).

2.
Remove the bolts (B), then remove the front door regulator (C).

5. All Removed Parts - Install

1.
Install the parts in the reverse order of removal.

NOTE: Apply multipurpose grease to all sliding surfaces of the front door regulator (A) where shown.