Rear Door Panel Removal and Installation

1.	Power Window Switch Panel - Remove

1.

Remove the power window switch panel (A).

2.

Disconnect the connector (B).

2.	Rear Door Panel - Remove

1.

Remove the rear door inner trim (A).

2.

Remove the screw (A, B).

3.

Start at the bottom edge of the rear door panel (A), remove the clips (B) with a commercially available trim pad remover.

4.

Pull then rear door panel out.

3.	PP Box - Remove

If necessary, remove the rear door PP box (A).

4.	All Removed Parts - Install

1.

Install the parts in the reverse order of removal.