Pull out the windshield side trim (A) at the upper area to release the small hooks from the retainers (B).
2.
While pulling up the trim by hand, carefully insert the trim tool (C) to remove the clip (D). Do not try to pry up the clip if it is hard to remove from the body, then remove the windshield side trim.
2.
Roof Molding - Remove
1.
Apply the protective tape (A) to the body.
2.
Remove the front end of the roof molding (B) from the pin (C).
3.
Remove the roof molding (A).
4.
Remove the rear end of the roof molding (A) from the pin (B).
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
