Rear License Trim Removal and Installation
1.
Tailgate Trim Panel - Remove
2.
Rear License Trim - Remove
1.
Remove the bolts (A).
2.
Carefully pull out the rear license trim (A) to release clips (B) and the pins (C) of the clips (D) from the grommets (E), then remove the trim.
NOTE: The grommets will stay in the tailgate.
3.
Remove the grommets from the tailgate, then install the grommets into the clips on the rear license trim.
3.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
