Rear Seat-Back Disassembly and Reassembly

The right rear seat is shown; the left rear seat is similar.

3. Rear Seat-Back Pad/Frame - Remove
1.
Remove the hooks (A).
2.
Unzip the rear seat-back cover (A).
3.
Remove the head restraint guides (A).
4.
Separate the rear seat-back pad (A) and the rear seat-back frame (B).
5.
If necessary, remove the lock lever inner cover (C).

4. Rear Seat-Back Cover - Remove
1.
Remove the upholstery rings (A) securing the rear seat-back cover (B).

5. Rear Seat-Back hinge - Remove

6. All Removed Parts - Reassemble
1.
Reassemble the parts in the reverse order of removal.
NOTE:
Replace all of the upholstery rings (A) fastening the rear seat-back cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).
Replace the push nut (E) with new one.
Apply multipurpose grease to the pin (F).