Exterior Lights Bulb Removal and Installation
Headlight (High/Low)

1. Headlight Bulb - Remove
1.
Disconnect the connector (A).
2.
Remove the rubber cover (B).
3.
Pull the retaining spring (A) away from the bulb (B), then remove the bulb.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Front Turn Signal/Parking Light

1. Front Turn Signal/Parking Light - Remove
1.
Disconnect the connector (A).
2.
Turn the bulb socket (B) counterclockwise to remove it from the housing.
3.
Remove the bulb (C) from the bulb socket.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Front Side Marker Light

1. Front Side Marker Light Bulb - Remove
1.
Disconnect the connector (A).
2.
Turn the bulb socket (B) counterclockwise to remove it from the housing.
3.
Remove the bulb (C) from the bulb socket.

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Rear Turn Signal Light

2. Rear Turn Signal Light Bulb - Remove
1.
Turn the bulb socket (A) counterclockwise to remove it from the housing.
2.
Remove the bulb (B) from the bulb socket.

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.

Back-Up Light

2. Back-Up Light Bulb - Remove
1.
Turn the bulb socket (A) counterclockwise to remove it from the housing.
2.
Remove the bulb (B) from the bulb socket.

3. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.