Under-Hood Fuse/Relay Box Removal and Installation
Special Tools Required
Image
Description/Tool Number
Relay Puller 07AAC-000A2A1 or 07AAC-000A1A0
NOTE: The under-hood fuse/relay box is a part of the left engine compartment wire harness, and it cannot be replaced by itself.
1.
12 Volt Battery Terminal - Disconnect
2.
PCM - Remove
3.
Under-Hood Fuse/Relay Box - Remove
1.
Remove the upper cover (A).
2.
Remove the harness clip (B).
3.
Cut the bands (C).
4.
Remove the covers (D).
5.
Remove the under-hood fuse/relay box (E) from the bottom cover (F).
6.
Remove the bottom cover.
7.
Carefully remove the relays using the relay puller tool.
NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start or cause other functions to fail.
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Confirm that all systems work properly.
