Front Individual Map Light Removal, Installation, and Test
1.
Front Individual Map Light - Remove
Without moonroof and HandsFreeLink
With moonroof or HandsFreeLink
1.
Turn the front individual map light switch OFF.
2.
Carefully pry off the lenses (A).
3.
Remove the front individual map light (B).
4.
Disconnect the connector(s) (C).
5.
Remove the bulb(s) (D).
2.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
1.
Front Individual Map Light - Test
Without moonroof and HandsFreeLink
With moonroof or HandsFreeLink
NOTE: When doing the front individual map light test, make sure to install the bulbs correctly.
1.
Check for continuity between the terminals in each switch position according to the table.
2.
If the continuity is not as specified, replace the bulb(s) or the front individual map light (A).
