Wiper Blade Removal and Installation
Windshield
1.
Windshield Wiper Blade - Remove
1.
Lift the wiper arm off the windshield, raising the driver's side first, then the passenger's side.
2.
Pull up the tab (A).
3.
Slide the windshield wiper blade assembly (B) off the wiper arm (C).
4.
Find the blade holder labeled "SET" (A).
5.
Pull back the wiper blade (B).
6.
Pull the wiper blade (A) through the wiper blade replacing opening.
7.
Remove the end cap (A) by pressing tab (B).
NOTE:
When removing it, take care not to damage the rubber holder (C).
When removing the wiper blade, does not need to remove the end cap.
Rear Window
1.
Rear Window Wiper Blade - Remove
1.
Lift the wiper arm off the rear window.
2.
Turn the rear window wiper blade assembly (A) and release the lock.
3.
Slide out the rear window wiper blade assembly.
4.
Lift the rear window wiper blade (A) from the wiper blade holder (B), then slide out it.
Windshield
1.
Windshield Wiper Blade - Install
1.
Install the end cap (A).
2.
Find blade holder labeled "SET" (A), and then install the tip side with no projection.
NOTE: End side with a projection shall not be installed.
3.
Install the new wiper blade (B).
4.
Install the windshield wiper blade assembly (A) on the windshield wiper arm (B).
5.
Test by turning on the wipers.
6.
If the blades slip, turn off the wipers and seat the windshield wiper blade assembly more firmly.
Rear Window
1.
Rear Window Wiper Blade - Install
1.
Install the new rear window wiper blade (A) and set the holder (B) into the groove.
2.
Install the rear window wiper blade assembly (A) to the rear window wiper arm (B).
3.
Teat by turning on the wiper.
4.
If the blade slips, turn off the wiper and the rear window wiper blade assembly more firmly.