Remove the self-locking nut (A) and the flange nut (B) while holding the respective joint pin (C) with a hex wrench (D).
2.
Remove the stabilizer link (E).
1.
Stabilizer Link - Install
1.
Install the stabilizer link (A).
NOTE: The stabilizer link has a paint mark (B). The paint mark indicates the difference between the left and right stabilizer links.
2.
Install the new self-locking nut (C) and the new flange nut (D), then tighten them to the specified torque while holding the respective joint pin (E) with a hex wrench (F).
