To prevent damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage.
Do not twist the brake hose excessively.
4.
Front Brake Disc - Remove
1.
Remove the brake disc flathead screws (A).
NOTE: The number of screws may be 1 for some models.
2.
Remove the brake disc (B).
NOTE: If the brake disc is stuck to the front hub, thread two 8 x 1.25 mm bolts (C) into the brake disc to push it away from the front hub. Turn each bolt 90 degrees at a time to prevent the brake disc from binding.
5.
All Removed Parts - Install
1.
Install the brake disc in the reverse order of removal.
NOTE: Before installing the brake disc, clean the mating surfaces between the front hub and the inside of the brake disc.
