Brake Hose Removal and Installation

Do not spill brake fluid on the vehicle; it may damage the paint. If brake fluid gets on the paint, wash it off immediately with water.

NOTE: After removal, plug the ends of the hoses and the joints to prevent spilling brake fluid.

Front

3. Brake Hose - Remove
1.
Disconnect the brake line (A) from the brake hose (B).
2.
Remove the brake hose clip (C).
3.
Remove the banjo bolt (A), and disconnect the brake hose (B) from the caliper body.
4.
Remove the brake hose mounting bolt (C), then remove the brake hose.

Rear

3. Brake Hose - Remove
1.
Disconnect the brake lines (A) from the brake hose (B).
2.
Remove the brake hose clips (C), then remove the brake hose.


Do not spill brake fluid on the vehicle; it may damage the paint. If brake fluid gets on the paint, wash it off immediately with water.

Front

1. Brake Hose - Install
NOTE:
Check that all parts are free of dirt and other foreign particles.
Replace parts with new ones whenever specified to do so.
1.
Install the brake hose (A) with the brake hose mounting bolt (B).
2.
Connect the brake hose to the caliper body with the banjo bolt (C) and new sealing washers (D).
3.
Install a new brake hose clip (A) to the brake hose (B).
4.
Connect the brake line (C) to the brake hose.
NOTE: Do not twist the brake hose.

3. Brake Hose and Line - Check

NOTE:
Check for leaks at hose and line joints or connections, and retighten if necessary.
Check the brake hoses for interference and twisting.

Rear

1. Brake Hose - Install
NOTE:
Check that all parts are free of dirt and other foreign particles.
Replace parts with new ones whenever specified to do so.
1.
Install new brake hose clips (A) to the brake hose (B).
2.
Connect the brake lines (C) to the brake hose.
NOTE: Do not twist the brake hose.

3. Brake Hose and Line - Check

NOTE:
Check for leaks at hose and line joints or connections, and retighten if necessary.
Check the brake hoses for interference and twisting.