Steering Angle Sensor Removal and Installation

NOTE: SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before doing repairs or service.

3. Cable Reel/Steering Angle Sensor - Remove
1.
Disconnect the connectors (A).
2.
Remove the cable reel/steering angle sensor (A).

4. Steering Angle Sensor - Remove
1.
Remove the steering angle sensor (A) from the cable reel (B).
NOTE: During installation, position the two tabs (C) of the steering angle sensor as shown.

5. All Removed Parts - Install
1.
Install all removed parts in the reverse order of removal.