Dust and Pollen Filter Removal and Installation
1. Dust and Pollen Filter - Remove
1.
Turn the vehicle to the OFF (LOCK) mode.
2.
Lower the glove box (A).
3.
Remove the lid (B).
4.
Remove the dust and pollen filter (C).

2. All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: Make sure there is no air leaking out of the blower unit.

3. Maintenance Minder - Reset (With Maintenance Minder System)
1.
If the Maintenance Minder required to replace the dust and pollen filter, reset the Maintenance Minder with the gauge. If the Maintenance Minder did not require to replace the dust and pollen filter, reset the Maintenance Minder with the HDS.