Heater Control Panel Disassembly and Reassembly
1.
Heater Control Panel - Exploded View
1.
Heater Control Panel, Air Mix Control Cable, Heater Control Base, Mode Control Cable, and Recirculation Control Cable - Remove
1.
Remove the heater control panel (A) from the heater control base (B).
2.
Without keyless access system: Remove the lid (C).
3.
Using a snap ring pliers, widen the cable stops (D) in the cable holder (E), then pull out the control cables (F).
2.
Bulbs - Remove
1.
Remove the harness (A), then remove the bulbs (B).
3.
Heater Fan Switch - Remove
1.
Remove the knob (A)
2.
Remove the heater fan switch (B).
4.
All Removed Parts - Install
1.
Install the parts in the reverse order of removal.
NOTE: After assembly, check that the lever slides or the dial turns smoothly through the full stroke from right to left.
