Countershaft Bearing Replacement
Special Tools Required
Image
Description/Tool Number
Bearing Driver Attachment, 52 x 55 mm 07746-0010400
Driver Handle, 15 x 135L 07749-0010000
Adjustable Bearing Remover Set 07JAC-PH80000
1.
Countershaft Bearing - Remove
1.
Remove the bearing set plate (A).
2.
Remove the needle bearing (A) using the adjustable bearing remover set.
3.
Remove oil guide plate C.
2.
Countershaft Bearing - Install
1.
Position oil guide plate C and the needle bearing (A) in the bore of the clutch housing (B).
2.
Install the needle bearing using the 15 x 135L driver handle and the 52 x 55 mm bearing driver attachment.
3.
Install the bearing set plate (A).
