Remove the roller (A), the select lock return spring (C), and select lock cam B.
1.
Reverse Lockout Solenoid - Reassemble
1.
Install the roller (A), the select lock return spring (C), and select lock cam B.
2.
Reverse Lockout Solenoid - Install
1.
Clean any dirt and oil from the sealing surface of the shift arm cover and the reverse lockout solenoid.
2.
Apply liquid gasket (P/N 08718-0004 or 08718-0009) evenly to the shift arm cover mating surface of the reverse lockout solenoid. Install the component within 5 minutes of applying the liquid gasket.
NOTE:
If you apply liquid gasket P/N 08718-0012, the component must be installed within 4 minutes.
If too much time has passed after applying the liquid gasket, remove the old liquid gasket and residue, then reapply new liquid gasket.
