Transmission Mount Removal and Installation
1.
12 Volt Battery - Remove
2.
Air Cleaner - Remove
3.
Under-Hood Fuse/Relay Box Mounting Bolt - Remove
4.
PCM with Bracket - Remove
1.
Remove the PCM with bracket (A) without disconnecting the PCM connectors.
2.
Remove the harness clamps (B).
5.
Engine Undercover - Remove
6.
Transmission - Support
1.
Lift and support the engine with a jack and a wood block under the transmission.
7.
Transmission Mount - Remove
M/T
CVT
1.
Remove the ground cable (A).
2.
Remove the air cleaner bracket (B).
3.
Remove the transmission mount (C).
1.
Transmission Mount - Loosely Install
M/T
CVT
1.
Install the transmission mount (A).
2.
Tighten new transmission mount mounting bolts (B) and loosely install new transmission mount bracket mounting bolt and nuts (C).
3.
Install the air cleaner bracket (D).
4.
Install the ground cable (E).
2.
Jack and Wood Block - Remove
3.
Torque Rod Mounting Bolt - Loosen
M/T
CVT
1.
Loosen the torque rod mounting bolts (A).
4.
Transmission Mount Bracket Mounting Bolt and Nut - Tighten
M/T
CVT
5.
Torque Rod Mounting Bolt - Tighten
M/T
CVT
6.
Engine Undercover - Install
7.
PCM with Bracket - Install
1.
Install the PCM with bracket (A).
2.
Install the harness clamps (B).
8.
Under-Hood Fuse/Relay Box Mounting Bolt - Install
9.
Air Cleaner - Install
10.
12 Volt Battery - Install
